Stainless Steel Impeller Puller
Changing your performance boat’s impeller regularly is a smart way to avoid engine overheating and big mechanic’s bills. You should perform this maintenance at least once a season and more if you use your boat a lot.
Having the right tool for the job will make the operation easier. The Stainless-Steel Impeller Puller from Bakes Marine helps you remove your raw water impeller without damaging the old impeller or the pump seal. This tool works great on Johnson 08-812 impellers and F6B pumps.
Use the proper tool to remove your raw water impeller without damaging the old impeller or the pump seal. Prying out the impeller leads to premature seal failure and damage to the brass impeller housing.
This impeller puller is the right tool for the job and allows for the easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the T-handle center screw to pull the impeller out of the pump with ease.
- Works great on Johnson 09-812 impellers & F6B pumps
- Diameter 2-1/4" inches to 2-9/16" inches
- Handle length 3-7/16" inches
- Height 5-3/16" inches
|Manufacture part number||660040-1|