Johnson Raw Water Pump Seal Only

Product Description:

Although you're surrounded by water in your boat, it's possible your engine may not get enough water to provide proper cooling. That can be disastrous for your boat engine and for your bank account.

If your pump is leaking, you may not need to do a complete water pump replacement. A leaky water pump is normally caused by this seal being worn or deformed. The problem usually is caused by removing or installing your impeller with improper tools. Any type of side pressure on the impeller pump shaft may distort this seal, causing a leak.

If you do find a leak in your raw water pump, you should fix it as soon as possible. Ignored, the problem won't go away on its own. It will only get worse, which could eventually lead to overheating, a seriously damaged engine and big repair bills.

The Johnson Raw Water Pump Seal from Bakes Marine is a genuine Johnson part, so you can be assured of quality. Replacing water pump seals provides an inexpensive alternative to costly engine repairs or replacements.

Water pump seal replacement is not particularly difficult. This seal for water pump repairs is inexpensive, and if you are handy, it can offer an affordable leaking water pump quick fix. Water pump seal kits should be in every boat owner's emergency repair kit. By correctly installing your new pump seal in a basic water pump repair, water will get to where it is supposed to go, inside the engine keeping things cool.

Product Specs:

• Genuine Johnson Service Part
  • Seal measures 1-1/8" OD across (left to right)
  • Seal measures 9/16" ID across (left to right-center hole diameter)
  • Seal measures 1/4"-thick front to back
  • Indmar part # 685004
  • Sold individually