Indmar Exhaust Fitting Nylon Straight 1/2" NPT x 5/8" Barb

Indmar Nylon Exhaust Manifold Straight Fitting. DO NOT replace this fitting with anything other than nylon. Replacing these fittings with brass causes the area around the fitting to act like zinc because of the metallurgic difference.

Product Specs:

• Can withstand temperatures above 250 degrees Fahrenheit
• Fitting measures on the thread side: 1/2"NPT - Approx 7/8" Inches
• Fitting measures on the hose barb side: 5/8" inch
• Used on Indmar ETXCAT manifolds for the cross-over water drain hose.
• Sold individually

Please Note that NPT Thread (National Pipe Thread) is not a measured size, it is rather an industry call-out size. The NPT call-out designation is not the true thread diameter inside or out. View images and use the thread conversion chart to find your NPT size.