Fly High W709-SUPA Tsunami Ballast Pump and Hose System 1700 GPH
The Fly High Tsunami Pump is the fastest pump that you put over the side of the boat and plug into the 12V accessory plug to manually fill and empty the fat sacs. It is made to go on and off the Pro X Series Fat Sacs very vast and easy to save time. The clear hose on the Tsunami Pump (W709) allows you to clearly see when the water is flowing well. It also allows you to see if there are any air bubbles, weds, sand or dirt in the water slowing the flow or are being pumped into your fat sac.
The Fly High Tsunami Pump is the fastest pump that you put over the side of the boat and plug into the 12V accessory plug to manually fill and empty the fat sacs. It is made to go on and off the Pro X Series Fat Sacs very vast and easy to save time. The clear hose on the Tsunami Pump (W709) allows you to clearly see when the water is flowing well. It also allows you to see if there are any air bubbles, weds, sand or dirt in the water slowing the flow or are being pumped into your fat sac.
Product Details:
- 1,700 gallons per hour
- 1 1/8" threaded connection
- Includes fittings to fill Fly High Pro X bags
- Quick connections make filling/draining a snap
- 12.5' Hose Length
- 20' Wire Length
Directions for Use:
- Step 1: First Put the Tsunami Pump over the side of the boat (while stationary) under the water
- Step 2: Then Counter Twist the end of the hose before sticking it in the quick connect with cap and chain on the top of the Pro X Series Fat Sac so it twists back and holds itself in the groove
- Step 3: Plug the Tsunami Pump into the 12v accessory plug
Manufacturer | Barefoot International |
---|---|
Manufacture part number | W709 |
Weight | 5.500000 |
Country of Manufacture | United States |